Read First
HBOT and Diabetic Foot Ulcers — What Protocols Discuss
Quick answer: Published diabetic-foot-ulcer protocols typically discuss clinical HBOT pressures around 2.0–2.5 ATA under medical supervision — one of the more established HBOT areas. Whether HBOT is appropriate remains a medical decision — consult a qualified doctor. If pursued clinically, the equipment is a hard (clinical) hyperbaric chamber, which TheHBOT supplies from ₹15 lakh.
Important — educational information only. This page summarises what published hyperbaric oxygen therapy (HBOT) research and clinician protocols discuss. It is not medical advice, a diagnosis, or a treatment plan, and makes no claim to treat, cure or prevent any condition. If you are considering HBOT, consult a qualified doctor. TheHBOT supplies hyperbaric chambers (equipment) — we do not provide therapy or run sessions.
Chronic diabetic foot ulcers are among the more established areas in the published hyperbaric literature, and wound-care programmes are a common reason clinics and hospitals evaluate HBOT equipment. As always, our role is narrow and honest: we summarise, for education, the clinical pressures and session structures that published protocols discuss, and then help with the equipment side — supplying the clinical hyperbaric chamber such a programme would use. We are a multi-brand aggregator and on-demand manufacturer, not a clinic; we do not diagnose, treat, or make outcome claims.
For a patient, the right first step is a qualified doctor, ideally within a diabetic-foot or wound-care service. For a clinic, hospital or wound-care facility building an HBOT capability, the equipment decision is our area — comparing clinical chambers across five brands, arranging AERB documentation, and delivering and supporting the unit across India. Below is what published protocols describe and which chamber matches.
Summarises published protocols — not a diagnosis or treatment plan.
Suitability is a medical decision, ideally within a wound-care service.
Clinical wound protocols use a hard chamber — which we source and deliver.
Clinics, hospitals and wound-care centres evaluating equipment.
India Pricing
The Chamber a Wound-Care Programme Would Use
Diabetic-foot protocols describe clinical pressures, which means a hard (clinical) chamber rather than a mild soft unit. Indicative India price bands:
| Chamber Type | Pressure | Primary Buyer | Indicative India Price | Get Price |
|---|---|---|---|---|
| Soft / Portable | 1.3 – 1.5 ATA | Home, wellness, athletes | ₹3.5 – 12 lakh | Enquire → |
| Hard Monoplace | 1.5 – 3.0 ATA | Clinics, hospitals | ₹15 – 40 lakh | Enquire → |
| Hospital Multiplace | 2.0 – 3.0 ATA | Hospitals, wound-care | ₹40 lakh – 1.5 crore+ | Enquire → |
For the equipment detail see the hard chamber page and the chamber for wound care facility guide. Read more at Hyperbaric medicine.
Product Range
Which Chamber Type Matches Clinical Protocols
Diabetic-foot protocols describe clinical pressures above mild soft-chamber range — here is the comparison.
Inflatable fabric-shell units from OxyHealth and Summit to Sea. Compact, self-install.
Rigid-shell monoplace units from Sechrist for hospitals and specialist clinics.
Carry-case designs from Summit to Sea. Travel-ready for athletes and mobile practitioners.
Multiplace systems from Perry Baromedical and Fink. 2–18 patient capacity, AERB docs.
The Detail
What Published Protocols Describe — and the Equipment
What published protocols discuss (educational)
Diabetic foot ulcers are among the more established areas in the hyperbaric literature, and published wound protocols typically describe clinical pressures around 2.0–2.5 ATA, delivered in supervised sessions over a course, often as part of a broader wound-care plan. We present this to inform your reading and your discussion with a clinician only. It is not a recommendation, a protocol to follow, or a guarantee of any outcome — whether HBOT is appropriate for a particular ulcer is a medical judgement, best made within a diabetic-foot or wound-care service, not by an equipment supplier.
Why this points to a hard (clinical) chamber
The equipment consequence is clear: clinical wound pressures of 2.0–2.5 ATA are well above what a mild soft chamber (1.3–1.5 ATA) provides, which points to a rigid hard chamber. A single-patient wound clinic would use a monoplace clinical chamber such as a Sechrist; a hospital wound-care unit treating several patients would use a multiplace system from Perry Baromedical or Fink, where an attendant can be inside. Matching that pressure and configuration to your programme is precisely what we help with, comparing across five brands rather than one.
Building a wound-care HBOT capability
A clinic or hospital adding a wound-care HBOT capability is making an equipment and facility decision alongside the clinical one. Beyond the chamber there is AERB and facility planning, oxygen supply and fire safety, installation and commissioning, and warranty and after-sales — covered in our compliance and AMC guides. As an aggregator we bring the chamber options together, provide the technical documentation your facility and biomedical teams need, and coordinate delivery and installation across India. Clinical protocols and patient care remain entirely with your wound-care and medical teams.
Owning the equipment for a wound programme
For a facility running a wound-care service, owning the chamber is usually the sensible route — you control scheduling and hold a long-life clinical asset. Our payback calculator and AMC guide help you model the full cost of ownership. For an individual patient, by contrast, diabetic-foot HBOT belongs within a supervised wound-care service, not a home setup, and we will say so honestly rather than sell equipment that is not appropriate.
How we help — equipment only
To be clear: TheHBOT.com supplies hyperbaric chambers and builds them to specification on demand. We compare OxyHealth, Sechrist, Summit to Sea, Perry Baromedical and Fink, source genuine units, and deliver, install and support them across India. We do not provide therapy, run sessions, diagnose, or make outcome claims. If your clinic or hospital, guided by qualified clinicians, is building a wound-care HBOT capability, tell us the clinical pressures your protocol calls for, your capacity and city, and we will recommend the best-fit chamber and return a delivered India price, usually within one business day.
Buying Guide
If You're Evaluating the Equipment
For a clinic, hospital or wound-care facility, tell us these to specify the right chamber.
Clinical pressures — What ATA does your protocol call for (per your clinicians)?
Capacity — Single-patient monoplace, or multiplace?
Setting — Clinic, hospital or wound-care centre?
Compliance — AERB and facility documentation needed?
City — Where should we deliver and install?
Explore Pricing & Options
Compare Before You Buy
Continue to the page that matches where you are in your decision.
Quick Reference
What Published Protocols Describe (Educational)
| Aspect | What Published Protocols Discuss |
|---|---|
| Typical pressure | Around 2.0 – 2.5 ATA (clinical, supervised) |
| Evidence status | One of the more established HBOT areas |
| Equipment involved | Hard (clinical) chamber — monoplace or multiplace |
| Relevant brands | Sechrist, Perry Baromedical, Fink |
| India price (equipment) | From about ₹15 lakh |
| Our role | Supply the chamber — not therapy or claims |
FAQ
HBOT for Diabetic Foot Ulcers — FAQs
Educational answers about the protocols and the equipment. Not medical advice.